www.neolab.ru
Lab equipment in the focus of view
 
Suppliers
Products & Prices
Manufacturers
News
Information
Page 1 from 1
    
Contacts
News
Subsidiaries
Dateascending News
17.01.03 Ultrarcentrafuge Product Update

As announced at the annual SCA meeting Core Lab has a global channel partnership agreement with BCI whereby we are the only manufacturer licensed to perform the necessary bin conversion and manufacture PIR16.5 inverted, PIR20, PIR20.1 and PIR45 rotors for use with BCI’s new L-100 XP high speed centrifuge. Production of rotors has started and we are now shipping units to meet your need for state-of-the-art reliable centrifuges for 1.5 inch drainage imbibition, 1 inch drainage/imbibition sample preparation for relative permeability and extreme high speed 45,000 rpm rotors.

The automated ultracentrifuge system is designed to be used for desaturation of samples saturated with water while introducing oil or air and may be used for primary drainage, imbibition and secondary drainage capillary pressure including Amott/USBM wettability and relative permeability with measurements during start-up with 1", 30 mm and 1.5" samples when correct rotors are installed. Rotors, cups and receiver systems available:PIR 20.1 for Sample Preparation of 1.5 inch samples. PIR 20 for drainage and imbibition of 1 inch samples.PIR 16.5 drainage for 1.5 inch samples.PIR16.5/inverted for 1.5 inch samples.The PIR 20 rotor has a standard and inverted bucket set for 6 plugs. Inverted buckets enable imbibition experiments with the receiver at the inner instead of at the outer radius. The produced liquid is recorded using a computer controlled CCD line camera and strobe unit with interface resolution of 0.002". An automatic operation module is available, but operation may be in either automatic or manual mode.
16.01.03 Core Lab is pleased to announce that as of January 20, 2003, Core Laboratories Instruments’ manufacturing facility will relocate from Carrollton to our corporate campus in Houston. This development will enhance our corporate strategy of close synergy between our globally renowned analytical labs and our manufacturing arm allowing us to introduce technical innovations to the market place as rapidly as possible.
Please note new contact details for all our domestic and international clients and systems users:

Core Laboratories Instruments 6339 Windfern Houston, Texas 77040 U.S.A. Tel: 1-713-328-2673 Fax: 1-713-328-2174 coreinsttech@corelab.com

Derek Beckett - General Manager dbeckett@corelab.com Tel.: 1-713-328-6166
Jeremy Bland – Technical Director jbland@corelab.com Tel.: 1-713-328-6170
Our international sales team will remain based at our U.K. sales office:
Duncan Thow dthow@corelab.com Tel: 44-1224-421095 Fax: 44-1224-421 005

 
 
002343 Powered by DSGroup | version 2.0 | © neoLab.ru 1998-2024